To Next PageTo Next Page
Need help?Do you have a question about the LEGRAND KEOR HPE UPS and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Transfer Time | 0 ms |
| Humidity | 0-95% non-condensing |
| Capacity | 10-20 kVA |
| Output Voltage | 220/230/240 VAC |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Ports | USB, RS232 |
| Standards | EN 62040-1, EN 62040-2, EN 62040-3 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Topology | Online Double Conversion |
Guidance on the proper and safe usage of the Uninterruptible Power Supply (UPS) system.
Explanation of the operational ratings and specifications found on the UPS identification plate.
Covers general warnings, personnel safety, and guidelines for transport and handling of the UPS.
Instructions and precautions for the safe installation of the UPS unit.
Guidelines for safely connecting the UPS to the AC power system and ensuring compliance.
Safety measures and precautions to be observed during the operation of the UPS.
Procedures and precautions for safe maintenance operations on the UPS.
Recommendations for storing the UPS correctly prior to installation.
Information on the UPS's environmental impact and recycling of materials.
Instructions for inspecting the UPS upon receipt and handling potential damages.
Guidelines and precautions for safely handling the UPS unit during transport and installation.
General guidance on positioning and installing the UPS within the environment.
Specifications for the supporting base, including static loads and weight distribution of the UPS.
Details on the UPS's physical dimensions, required clearances, and ventilation needs.
Classification and requirements for environmental conditions at the installation site.
Instructions for correctly positioning and connecting the UPS batteries.
Instructions for connecting the main power cables to the UPS, including safety precautions.
Details and characteristics of the external sectioning device for backfeed protection.
Description of the terminal boards used for connecting power cables and auxiliary connections.
Information and safety precautions related to the UPS battery system.
Guidance on connecting and positioning the internal or external battery units.
Specific instructions for installing 7/9/11Ah 12V batteries in the UPS.
Specific instructions for installing 12/14Ah 12V batteries in the UPS.
Instructions for connecting external controls and components via auxiliary cables.
Overview of serial interfaces and external connection facilities for UPS communication.
Details on connecting the optional relay card for remote alarm and status signaling.
Essential checks to perform before starting up the UPS unit.
Step-by-step instructions for safely starting up the UPS system.
Common issues and solutions encountered during the UPS startup procedure.
Steps for safely shutting down the UPS system.
Procedure for transferring the load to the manual bypass without interrupting supply.
Instructions for restarting the UPS from the manual bypass configuration.
