LEGRAND KEOR HPE UPS User Manual

Installation and start-up of KEOR HPE UPS 60÷160 kVA
Installation et démarrage de l’ASI KEOR HPE 60÷160 kVA
Installazione e avviamento KEOR HPE UPS 60÷160 kVA
OML46086 REV. C
19
2.3.8 Storage
If the product is stored prior to installation, it should remain stored in its original package in a dry
place with a temperature ranging from -10°C to +45°C.
Special environmental conditions
It is necessary to implement specific protective measures in case of unusual
environmental conditions:
 harmful smoke, dust, abrasive dust;
 humidity, vapour, salt air, bad weather or dripping;
 explosive dust and gas mixture;
 extreme temperature variations;
 bad ventilation;
 conductive or radiant heat from other sources;
 fungus, insects, vermin.
2.4 ENVIRONMENTAL PROTECTION
2.4.1 ISO 14001 certification
Legrand is particularly sensitive to the environmental impact of its products. That is why the UPS has
been manufactured with cutting-edge eco-design criteria (ISO 14001 certification).
Special care was taken in using fully recyclable materials and in reducing the amounts of raw
materials used.
2.4.2 Recycling of packing materials
Packing materials must be recycled or disposed of in compliance with applicable local and national
laws and regulations.
2.4.3 Device disposal
At the end of their product life, the materials composing the device must be recycled or disposed of
in compliance with the current local and national laws and regulations.

LEGRAND KEOR HPE UPS Specifications

General

Frequency	50/60 Hz
Transfer Time	0 ms
Humidity	0-95% non-condensing
Capacity	10-20 kVA
Output Voltage	220/230/240 VAC
Battery Type	Sealed Lead-Acid (SLA)
Communication Ports	USB, RS232
Standards	EN 62040-1, EN 62040-2, EN 62040-3
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Topology	Online Double Conversion