5
INSTALLATION AND USER GUIDE
DESCRIPTION OF THE SYSTEM ARCHITECTURE
sockets
cords
plugs
sockets
sing the table
782 12 0 766 60
1 W 0.4 W per
direction
corresponds to 30%
DEVICE PRESENTATION
AND INSTALLATION
1- Management module terminals
2- Room 6 terminals
3- Room 1 terminals
4- Room 2 terminals
5- Room 3 terminals
6- Room 4 terminals
7- Room 5 terminals
0 766 60
1 2
3
4 5 6 7
Technical characteristics
n Power supply: 24 V=
n Consumption: min. 0.4 W - max. 2.8 W
n Operating temperature: 5 to 40°C
n Protection class: IP 40
n Dimensions: 135 x 22.5 mm
n Installation:
- On table control unit Cat.No 0 782 14
- Flush-mounted in 50 mm deep box Cat.No 0 800 53
- Surface-mounted with 40 mm deep box Cat.No 0 802 86
n Sound level: - 65 dB (A) at 1 m placed on table
- 75 dB (A) fixed to wall 1.60 m off the floor
- 62 dB (A) at 1 m placed on table
- 72 dB (A) fixed to wall 1.60 m off the floor
ConnectionPerforms the main and secondary display functions.
Main display unit: used to monitor rooms in the department from
the nurses' station.
Secondary display unit: used to transfer information from the
main display unit. 4 secondary display units max.
Indicates calls by lighting up numbered indicator lights and
generating an audible signal.
Can indicate several calls simultaneously.
Displays the call and nurse presence and mute setting.
Calls can be transferred to 4 other display units (treatment room,
rest area, etc.).
Supplied without plate.
Supplied with sheets of numbered stickers from 1 to 99.
0 766 60: 6DIRECTION CALL DISPLAY UNIT*
Direction
identification*
Mute button
Identification labels
supplied
* Direction: room from which the calls originate
LE08358AB_EN.indd 5 22/06/2016 09:14
To Next Page
Loading...
