7
DEVICE PRESENTATION AND INSTALLATION
MOSAIC NURSE CALL UNIT
66
66
Cat.No 766 60
Cat.No 766 60
0 782 12: 3DIRECTION MANAGEMENT MODULE*
Technical characteristics
n Power supply: 24 V=
n Consumption: min. 39 mA
max. 300 mA
n Operating temperature: 5 to 40°C
n Dimensions: 4 DIN modules
Connection
Manages 3 directions.
Possibility of forwarding:
- for indicator
- for audible signal via a solid state relay
- on DECT, via a telephone coupling product
- on master indicator (lights up if the indicator on at least one of
the 3 directions is lit up).
0 782 14: TABLE CONTROL UNIT
Technical characteristics
n Protection class: IP 40 with blanking plates
n Dimensions: 310 x 295 x 75 mm (36 modules)
Support frame which can take up to 6 display units
Cat.No 0 766 60.
Makes it easier to run cables when installing several
displayunits.
Fit blanking plates over unused positions.
Installation
Cat.No 770 71
* Direction: room from which the calls originate
1- 24 V= power supply terminals
2- Master indicator or
solid state relay terminals
3- Call display unit terminals
4- Door unit direction 1
5- Door unit direction 2
6- Door unit direction 3
7- Volt-free contact for DECT,
indicator, audible signal
8- Terminal block for door unit:
0 782 04 (15W22)
3
4
8
567
1
2
W
R
LE08358AB_EN.indd 7 22/06/2016 09:14