23
Waveform (Batt. mode)
3000 VA/2400 W
3 kVA
72 FMI
MODEL
CAPACITY*
Voltage
Low line transfer
Low line comeback
High line transfer
High line comeback
1 kVA
FMI
Frequency range
Phase
Power factor
Output voltage
AC voltage regulation
Frequency Range
(Synchronized Range )
Frequency Range (Batt. Mode)
Overload
Current crest ratio
Harmonic distortion
Transfer
time
AC mode to batt. mode
Inverter to Bypass
160 VAC/140 VAC/120 VAC/110 VAC ± 5%
(based on load percentage 100% - 80 % / 80 % - 70 % / 70 - 60 % / 60 % - 0)
185 VAC/165 VAC/145 VAC/135 VAC ± 5 %
(based on load percentage 100% - 80%/80% - 70%/70 - 60%/60% - 0)
300 Vac ± 5%
290 Vac ± 5%
40 Hz ~ 70 Hz
Single phase with ground
≥ 0.99 @ nominal input voltage
200/208/220/230/240 Vac
± 1%
47 ~ 53 Hz or 57 ~ 63 Hz
50 Hz ± 0.25 Hz or 60 Hz ± 0.3 Hz
105%~110%: UPS shuts down after 10 min at battery mode
or transfer to Bypass when the utility is normal
110%~130%: UPS shuts down after 1 min at battery mode
or transfer to Bypass when the utility is normal
>130%: UPS shuts down after 3 secs at battery mode
or transfer to Bypass when the utility is normal
3:1
≤ 3% THD (Linear load)
≤ 5% THD (Non-linear load)
Zero
4 ms (Typical)
Pure Sinewave
2000 VA/1600 W
1000 VA/800 W
2 kVA
7 2FMI
2 kVA
96V FMI
3 kVA
96 FMI
INPUT
OUTPUT
24
8. SPECIFICATIONS
8-2. UPS with ISO transformer
8
200
32 A max
109.5 Vdc ±1%
43.0
Battery type
Battery numbers
Maximum battery AH
Current of external Batt. pack
Charging current
Charging voltage
Depending on the capacity of external batteries
EXTERNAL BATTERY
ENVIRONMENT
Supports Windows
®
2000/2003/XP/Vista/2008/7/8/10, Linux, Unix and MAC
Power management from SNMP manager and web browser
MANAGEMENT
Operation humidity
Noise level
20-90% RH
@ 0- 40°C (non-condensing)
Less than 50 dBA
@ 1 Meter (AVG)
Smart RS-232 or USB
Optional SNMP
3
150
30 A max
1.0A/2.0A/
4.0A/8.0A
41.0 Vdc ± 1%
6
200
30 A max
82.1 Vdc ±1%
8
200
30 A max
109.5 Vdc ±1%
6
200
45 A max
82.1 Vdc ±1%
Dimension (D x W x H) mm
Net weight (kgs)
465x190x465
21.3
435 x 190 x 595
35.5
PHYSICAL
1.0A/2.0A/4.0A/6.0 A
*Derate capacity to 80% of capacity in Frequency converter mode or when the output voltage is adjusted
to 208 VAC/200 VAC. Product specifications are subject to change without further notice.
To Next Page
Loading...
Need help?
General