10
QZHUB3 - THIRD PARTY
INTEGRATIONS
QZHUB3 - TRANSFERRING OWNERSHIP AND REVOKING ACCESS
1. Tap on the integration button and
tap the generate code. You will
use the 6 digit code to enable the
hub for the system.
1. In the settings for QzHub3, tap
on the Transfer Ownership
and enter the email that you are
transferring access to. You can
also add users to the hub that will
grant them access to use the hub
as well.
If you are integrating with a 3rd party
system, you will need and integration code.
2. The person who now only needs
to log in to their Eliot account
when they open the app and they
will have access to the shades.
3. To revoke a user, simply tap
on the revoke button and enter
the email address you need to
remove.
RESETTING HUB SELECTION
If you need switch between hubs you are commissioning or editing you need to reset
the hub selection.
1. Navigate to the settings page and
tap on the Reset Hub Selection
button.
2. A prompt will appear asking if
you are sure you want to reset. In
order for the reset you will need
to close the app completely and
reopen it.
To Next Page
Loading...
Need help?
General
