ASSEMBLY INSTRUCTIONS FOR
LEICA DVM6 INTERFACE MODULE
This guide does not replace the complete manual provided on the CD.
INCLUDED COMPONENTS:
LEICA DVM6
1
2
3
4
5
6
10450707 interface module
to mount DVM6 to focus column
1
DVM6 focus column adapter
required to align DVM6 optical axis to Leica
TL5000 Ergo base
2
USB cable
to connect interface module to PC
3
4x M3x8 screws
to connect the zoom module with
the interface module
4
4x M5x20 screws
to mount the DVM6 focus
column adapter from underneath
to the standard adapter plate of
the TL5000 Ergo base
5
1x M5x25 screw
to x the interface module to the
focus column
6
10725700 / 04.2016
To Next Page
