6
2. Function of the Compact Light Source
2. Function of the Compact Light Source
The Leica LED1, LED3, LED5 and LED8 compact
light sources, with which this instructions for use
are associated, are intended for biological rou-
tine and research work as well as examinations
in materials science or mineralogy.
Reasonably foreseeable misuse
The following are prohibited:
• Using the light source for any purpose not in
accordance with the Declaration of Conformity
(e.g. use as a medical product in accordance
with EU Directive 93/42/EEC).
• Cleaning the light source in a way other than
specified in the manual.
• Modifying the built-in safety circuits in the in-
strument.
• Allowing unauthorized personnel to open the
instrument.
• Using cables that Leica has not provided or
permitted.
• Using combinations with non-Leica compo-
nents that go beyond the scope of the User
Manual.
• Operating the light source while it is not con-
nected to the stand.
Attention!
The manufacturer assumes no liability for
damage caused by, or any risks arising from,
using the light source for other purposes than
those for which they are intended or not us-
ing them within the specifications of Leica
Microsystems CMS GmbH.
In such cases, the Declaration of Conformity
shall be invalid.
Attention!
This instrument is not intended for use in a
patient environment as defined by DIN VDE
0100-710. It is also not intended to be com-
bined with medical devices as defined by
EN 60601-1. If a microscope is electrically
connected to a medical instrument in accor-
dance with EN 60601-1, the requirements de-
fined in EN 60601-1-1 shall apply.
To Next Page
