Notes:
• If you need help, click on the “Help” button to open
up a window containing the Capture One 4 manual,
where you can find a description of the activation
and deactivation process. The first time you start
Capture One 4, it opens in English. You can change
the language setting to the language of your choice
by selecting “Edit – Preferences” in the menu.
• If you require support when using Capture One 4,
call up the following page:
http://www.phaseone.com/Support and log in
with your “Phase One Profile” that was created
when activating the software.
System requirements
Microsoft
®
Windows
®
XP Professional or Home Edition
with Service Pack 2 / Vista
®
; Mac
®
OS X 10.4.11 or later
On some Windows
®
versions, it is possible that the
operating system will issue a warning about a missing
Windows signature. Ignore this message and continue
with the installation.
Installing firmware updates
Leica is constantly working on developing and optimiz -
ing its products. As digital cameras have many func-
tions that are controlled electronically, some of these
improvements and enhancements to the functions
can be installed on the camera at a later date.
To do this, Leica provides firmware updates at irregu-
lar intervals, which you can easily download from our
homepage to your camera yourself:
1. Format a memory card in your LEICA M8.2.
2. Turn off the camera and insert the card into an SD/
SDHC card reader – either integrated or connected
to your computer. (A reader is required for Firmware
updates).
3. Download the Firmware file from the Leica M8.
2
site using the “UPDATES” link.
4. Save the file m8-2_0xx.upd at the top level of the
card folder structure. The xx stands for the relevant
version.
5. Remove the card properly from your card reader,
insert the card into the camera and close the bot-
tom cover. Turn on the camera using the main
switch.
6. Confirm the prompt that appears in the monitor as
to whether you want to update the Firmware on the
camera to version 2.xx.
The update process takes around 180s. You will then
be prompted to restart the camera using the main
switch.
7. Turn the camera off and back on again.
Note:
If the battery does not have sufficient charge, you will
see a corresponding warning message.
Installing firmware updates
/ 151
To Next Page
