Malfunctions and their resolution 1. The LEICA M8.2 does not respond when
I turn it on.
1.1 Has the battery been correctly inserted?
1.2 Does the battery have sufficient charge?
Use a charged battery.
1.3 Has the bottom cover been correctly fitted?
2. The LEICA M8.2 turns itself off again as soon
as I turn it on.
2.1 Does the battery have sufficient charge to oper -
ate the LEICA M8.2?
Charge the battery or insert a charged battery.
2.2 Is there any condensation? This can occurs if the
LEICA M8.2 is moved from a cold place to a
warm place.
Wait until the condensation clears.
3. The LEICA M8.2 shutter refuses to trip.
3.1 Picture data are currently being transferred to
the memory card and the intermediate memory
is full.
3.2 The capacity of the memory card is exhausted and
the intermediate memory is full. Delete pictures
you no longer require before taking new ones.
3.3 No memory card has been inserted and the
intermediate memory is full.
4. I cannot save the picture.
4.1 Is a memory card inserted?
4.2 The capacity of the memory card is full.
Delete pictures you no longer require before
taking new ones.
5. The monitor is too dark or too bright.
5.1 When viewing the monitor image from wide
angles it is always more difficult to see.
If it is too pale or too dark although you are look -
ing at the monitor full on: Select a different
brightness
1
.
6. The picture I have just taken is not shown in
the monitor
6.1 Is the Auto Review function active (when setting
the LEICA M8.2 to picture mode?
2
7. I cannot display the picture.
7.1 Is a memory card inserted?
7.2 The memory card does not contain any data.
8. Despite being connected to a computer, I
cannot transfer any data.
8.1 Check whether the computer and the camera are
connected correctly.
9. The date and time displays show incorrect
values or are blank.
9.1 The LEICA M8.2 has not been used for a long
period, particularly if the battery has been re -
moved.
1. Insert a fully charged battery.
2. Set the date and time.
1
Not possible in snapshot mode
S
2
Always active in snapshot mode
S
Malfunctions and their resolution
/ 159
To Next Page
