MS60/TS60, Technical Data
68
Laser dot size
7.4 Distance Measurement - Long Range (LO mode)
Availability Only available for TS60.
Range
Atmospheric
conditions
Accuracy
Beam interruptions, severe heat shimmer and moving objects within the beam path
can result in deviations of the specified accuracy. The display resolution is 0.1 mm.
Characteristics
Distance [m] Laser dot size, approximately [mm]
at 30 7 x 10
at 50 8 x 20
at 100 16 x 25
Reflector Range A Range B Range C
[m] [ft] [m] [ft] [m] [ft]
Standard prism (GPR1,
GPH1P)
2200 7300 7500 24600 >10000 >32800
Range of measurement: 1000 m to 12000 m
Display unambiguous: up to 12000 m
Range A: Strong haze, visibility 5 km; or strong sunlight, severe heat shimmer
Range B: Light haze, visibility about 20 km; or moderate sunlight, slight heat
shimmer
Range C: Overcast, no haze, visibility about 40 km; no heat shimmer
Standard measuring std. dev.
ISO 17123-4
Measure time,
typical [s]
Measure time,
maximum [s]
Long Range 3 mm + 1 ppm 2.5 12
Principle: Phase measurement
Type: Coaxial, visible red laser
Carrier wave: 658 nm
Measuring system: System analyser basis 100 MHz - 150 MHz