Leica Nova MS60 - Page 82

MS60/TS60, Technical Data
82
Reflectors
There are no special prisms required for ATRplus or for PS.
Electronic Guide
Light EGL
Automatic Correc-
tions
The following automatic corrections are made:
Type Additive Constant [mm] ATRplus PS
Standard prism, GPR1 0.0 yes yes
Mini prism, GMP101 +17.5 yes yes
360° prism,
GRZ4 / GRZ122
+23.1 yes yes
360° Mini prism, GRZ101 +30.0 yes not recommended
Reflector tape S, M, L +34.4 yes no
Reflectorless +34.4 no no
Machine Automation
power prism, MPR122

For Machine
Control purposes
only!
+28.1 yes yes
Working range: 5 m to 150 m (15 ft to 500 ft)
Position accuracy: 5 cm at 100 m (1.97" at 330 ft)
• Line of sight error • Vertical index error
• Tilting axis error • Standing axis tilt
• Earth curvature • Refraction
• Circle eccentricity • ATRplus zero point error
• Compensator index error • Telescope camera zero point error