15
Safety Directions
Sprinter 50 - 1.0.0en
EN
DE
FR
ES
NO
SV
FI
DA
IT
PT
NL
CAUTION
Watch out for erroneous measurement
results if the product has been dropped or has been
misused, modified, stored for long periods or trans-
ported.
Precautions:
Periodically carry out test measurements and perform
the field adjustments indicated in the user manual,
particularly after the product has been subjected to
abnormal use and before and after important
measurements.
DANGER
Because of the risk of electrocution, it is very
dangerous to use staffs in the vicinity of electrical
installations such as power cables or electrical rail-
ways.
Precautions:
Keep at a safe distance from electrical installations. If
it is essential to work in this environment, first contact
the safety authorities responsible for the electrical
installations and follow their instructions.
CAUTION
Strong magnetic fields in the immediate
vicinity (e.g. transformers, melting furnaces...) may
influence the compensator and lead to measuring
errors.
Precautions:
When measuring near strong magnetic fields, check
results for plausibility.
CAUTION
Be careful when pointing the product towards
the sun, because the telescope functions as a magni-
fying glass and can injure your eyes and/or cause
damage inside the product.
Precautions:
Do not point the product directly at the sun.
WARNING
During dynamic applications, for example
stakeout procedures there is a danger of accidents
occurring if the user does not pay attention to the envi-
ronmental conditions around, for example obstacles,
excavations or traffic.
Precautions:
The person responsible for the product must make all
users fully aware of the existing dangers.
To Next Page
Loading...
