ADJUSTING THE FINGER ASSEMBLY
8
Chapter 2 D4R Pro User Guide
2-5 Do not over-tighten the guide finger locking screws. The
Leigh screwdriver provided will give ample torque for easy lock-up
without strain.
2-6 Always tighten unused guide fingers before routing, as router
vibration will cause loose screws and wedge nuts to fall out and
be lost.
2-7 You can adjust the guide fingers by eye, or by measurement
to suit a set of plans.
Note: Always lower the finger assembly down onto the workpiece
before routing.
■
To Next Page
Loading...
