71
71
When ordering parts, please quote the jig model, serial number,
part number, part description and quantity required.
See Parts Diagram on next page.
RTJ400 OPERATION
CHAPTER 14
Jig Parts
PART DESCRIPTION PART NO. QUANTITY
Template Extrusion, Machined 2500 1
Frame Extrusion, Machined 2505 1
Left Hand Handle 2510 1
Right Hand Handle 2515 1
Cam Clamp Handles 2520 4
Cam Lock Hold-Downs 2525 4
Clamp Arm Lever Platforms 2530 4
Clamp Arm Spring Washers 2535 4
Latches 2540 2
Latch Washers 2545 2
Sidestops 2550 2
Bit Depth Gauge, Plastic 2555 1
Blockers 2560 10
Clamp Pivot Nuts 2565 4
Clamp Springs 2570 4
Clamp T-Bolt s 2575 4
Quick Reference Strip, Through Dovetails 2580 1
Quick Reference Strip, Half Pitch Through Dovetails 2581 1
Quick Reference Strip, Half-Blind Dovetails 2582 1
Quick Reference Strip, 3/8" and 3/4" Box Joints 2583 1
Quick Reference Strip, 3/16" and 3/32" Box Joints 2584 1
User Guide 2590 1
Hex Key, 1/8" Ball End 2595 1
DVD Instructional Video 2596 1
Guide Bushing, Elliptical (eBush) e10 1
Pin Wrench 730V 1
Dovetail Bit, ½"x 13/16"x 8º 80-500 1
Dovetail Bit ½"x ½" x 14º 120-500 1
Straight Bit, 3/8"x 1¼" 143-500 1
Straight Bit, ½" x 1¼" Two Flute 160 1
Stop rod, Nylon, 24" 8618 1
Handle Screws, 8 x 1½" 260R 4
Latch Nuts, Nyloc, 10-24 2065 2
Sidestop Screws, Hex Head, 10-24 x 3/8" 6410 2
Latch Screws, 10-24 x ¾" 9130 2
Sidestop Nuts, Square, 10-24 9140 2
To Next Page
Loading...
