Leitner LH670 - How to Answer a Call; Answering Incoming Calls; Ending Active Calls

12
HOW TO
ANSWER A CALL
1
1
Press the ON/OFF button (
1
) and make
sure your base is in telephone mode (
2
).
2
Press the headset button on your
phone. If your phone doesn't have a
headset button, simply lift the handset
to activate the call.*
If you have a handset lifter or EHS cable connected to the
charging base, the line will be connected automatically.
2
For incoming landline call:
1
Press the ON/OFF button (
1
)
and your call will connect automat-
ically.
For incoming Bluetooth call:
To end the call:
Press the ON/OFF button (
1
) or place the
headset on the charging base.
If you have a handset lifter or EHS cable connected to
the charging base, the call will end automatically.
1
2
Manually hang up the call from your
landline phone or Bluetooth device.*