15
Extended guide
Screen saver. Once sleepy mode and stand-by are deactivated, but you still
want to prevent the wear of the LED display, the screen saver is automatically
activated.
On the LCC, a square starts moving around. Everything works correctly accord-
ing to set parameters and temperatures, but on the display the coffee boiler
temperature is replaced by the square moving around.
Sleepy mode. The sleepy mode is a machine state where the steam boiler is
turned off and the coffee boiler goes down to 70°C. You can choose when sleepy
mode is activated by setting the time on the LCC (from 30 to 540 minutes).
Stand-by. After 30 minutes of inactivity, the machine automatically goes into
stand-by mode. The LCC display and the heating elements are disabled, and the
ON/OFF button starts ashing.
Note. LELIT Technical team and lab suggest you turn ON and OFF the
machine according to your needs to optimise the energy consumption of your
machine.
12. Functioning modes
The LCC is the brain of the LELIT machines. In LELIT Bianca – PL162T, you
can nd all the functions that can be managed through setting the parameters
in the LCC.
How to adjust the LCC settings:
1. Press the button to enter the menu and scroll through the menu
2. Press the button to change the setting, it will start ashing
3. Change its value and/or state by using the and buttons
4. 3 seconds after the last press of any button, LCC stores the data and
exits from the menu
Note. If you wish to reset the LCC, with the machine OFF, keep the right
key/button pressed, turn the machine ON and wait until the display shows
PRS then turn the machine OFF again.
To Next Page
