Lelit PL162T-EU - 18. Annual Cleaning

28
LELIT Bianca - PL162T
17.4
5”x10
Steam wand cleaning. Fill a jug with 500 ml of cold
water, add the content of 1 bottle of detergent liquid
(I) and immerse the steam wand (5) in this solution.
Open the knob (4) by turning it anti-clockwise and
dispense steam for 5 seconds. Stop the function
and wait for 5 seconds.
Repeat the operation 10 times (Pic 17.4). Repeat
the entire procedure using 1 l of fresh water to rinse
the steam wand (5) properly.
Additionally, you can wash the exterior part of the steam wand (5) with a damp
cloth and release some steam to remove any milk residues from inside the tube, as
these could obstruct the steam output, making it more difcult to froth milk properly.
18. Annual cleaning
The descaling of the hydraulic circuit of the machine must be done every year to
ensure longevity and constant performances. The state of the machine needs to
be checked previously by your reseller/specialized technician and the descaling
operation must be done by a specialized technician to avoid ruining the internal
components of the machine.
Movable parts such as Paddle, group lever, lterholder, grouphead and water/
steam wands may be subject to wear and tear, requiring periodical check and
eventual lubrication. Please contact your reseller for further information.