12
LELIT Bianca - PL162T
8. How to install the water softener
filter
8.1
min
3
8.2 8.3
1
2
Attention. Before installing the water softener lter (M), follow the instruc-
tion for the rst start-up of the machine. The hydraulic circuit must be lled up.
Before installing the water softener lter in the water tank, immerse the lter (M)
in a jug full of water for about 3 minutes to eliminate the air inside the lter that
may cause a machine disfunction (Pic 8.1).
Take out the water tank (2) and remove the black plastic support placed on the
bottom of the tank. Insert the lter (M) in the bigger hole of the support, remove the
charge tube from the small plastic lter and x it on the nozzle of the lter (Pic 8.2).
Re-place the support in its seating on the bottom of the tank (2), rinse the tank
carefully, ll it with water and insert the tank in its seating (Pic 8.3).
9. Espresso and coffee
9.1 9.2
1
2
9.3
Note. Even though the machine is immediately ready to dispense espresso
coffee, it might take a few tries before getting the perfect cup of coffee.
To Next Page
Loading...
