Lelit PL92T - How to Install the Water Resin Filter; Filter Preparation and Insertion; Espresso and Coffee Making; Preparation and Tamping

English
11
EN
The machine is ready for use when the bar with the temperature on the LCC
display is complete and "OK" appears.
9. How to install the water resin filter
9.1 9.2 9.3
min
3
Before installing the resin lter (H) in the water tank (9), immerse the resin lter
in a jug full of water for about 3 minutes, to eliminate the air inside the lter that
may cause a machine malfunction (Pic. 9.1).
Take out the water charge tube from the water tank (9) and remove the small
plastic lter. Insert the resin lter (H) instead of the small plastic lter and x the
resin lter well (Pic. 9.2).
Insert the resin lter (H) xed at the end of the water charge tube into the water
tank (9) (Pic. 9.3).
10. Espresso and coffee
10.1 10.2 10.3
1
2
O
K
8
12
Choose your coffee lter, insert it into the lterholder (G) and ll it with the adequate