Lelit PL92T - Daily Cleaning; General Cleaning; Group Cleaning; Steam Wand Cleaning

Elizabeth - PL92T
4
1. Daily cleaning
1.1 1.2 1.3
Note. For an optimal result we suggest you use our kit PLA9101 (not included)
that contains a microber cloth with embroidered LELIT logo, a paintbrush with
bristles in natural bres and a brush with nylon bristles.
General cleaning. Use a soft cloth, preferably in microber, and moisten it with
tap water to clean the stainless-steel appliance body of the machine (Pic. 1.1).
Group cleaning. After each extraction empty the coffee lter, wash the
lterholder (G) and the relative lter with tap water and use a LELIT brush to
eliminate the coffee residues from the group gasket (Pic. 1.2).
Steam wand cleaning. After frothing the milk, clean the nozzle of the steam
wand (14) using a soft cloth and dispense a small quantity of steam to eliminate
every possible milk rest in the holes (Pic. 1.3).
Drip tray cleaning. The drip tray (15) should be hand washed with neutral soap
and warm water to remove build-up of coffee scum or mouldy coffee rests. This
can be done daily to avoid bad smells and bacteria.
2. Weekly cleaning
Note. In the equipment box you’ll nd the detergents (F) for the rst
cleaning cycle of the machine. Afterwards, we suggest you use our accessories
PLA9201 and PLA9203 (not included).
Filters and lterholder cleaning. It’s necessary to clean the lterholder to
eliminate the coffee oils that affect the taste of your drinks negatively. Place a
jug under the hot water wand (5), press the button for hot water distribution (4)
and take out about 1 l of water, press again the button (4) to stop the function.