Elizabeth - PL92T
6
2.4
10x5”
Steam wand cleaning. Fill a jug with 500 ml of cold
water, add the content of 1 bottle of detergent liquid
(F or PLA9203) and immerse the steam wand (14)
in this solution.
Open the knob (12) and dispense steam for 5
seconds. Stop the function and wait for 5 seconds.
Repeat the operation 10 times (Pic. 2.4).
Repeat the entire procedure using 1 l of fresh water
to rinse the steam wand (14) properly.
Water tank cleaning. Cleaning the water tank (9) will remove build-up of scale. Keeping
fresh water in the tank will minimize build-up of microorganisms. It is recommended
to change the water in the tank frequently to ensure proper hygiene and preserve the
taste of coffee. If your machine has sat idle for a long period of time, you will need to
empty and dry the tank. Simply remove the tank cover (8), take the tank out and hand
wash it with water and neutral soap, using a vertical brush and trying to clean up the
whole surface. Finally, rinse it thoroughly. Fill it with fresh water and before putting it
back in its seat, carefully dry the external surface of the water tank.
3. Annual cleaning
The descaling of the hydraulic circuit of the machine must be done every year to
ensure longevity and constant performances. The state of the machine needs to
be checked previously by your reseller/specialized technician and the descaling
operation must be done by a specialized technician to avoid ruining the internal
components of the machine.
4. Product overview
1. Coffee dispensing button 1
(with pre-infusion 1)
2. Coffee dispensing button 2
(with pre-infusion 2)
3. ON/OFF main switch
4. Hot water dispensing button
5. Fixed hot water wand
6. Coffee brewing group
7. Wire grate for drip tray
8. Water tank cover
9. Water tank
10. Cup warmer
11. Back-lit manometer for coffee
extraction
12. Steam dispensing knob
13. LCC (LELIT Control Center)
14. Multidirectional, anti-burn
steam wand
15. Removable drip tray
To Next Page
Loading...
