English
5
EN
Insert the lterholder (G) and the used lters into the jug but pay attention not to
immerse the lterholder handle (Pic. 2.1). Add 2 bags of detergent powder (F or
PLA9201). After 15 minutes, empty the jug and rinse the lterholder (G) and the
lters with plenty of tap water.
2.1 2.2 2.3
min
15
Backushing. Before starting the procedure empty the drip tray and reinstall
it into the unit. Insert the blind lter (C) into the lterholder (G) and pour 1 bag
of detergent powder (F or PLA9201) into the lter. Insert the lterholder in the
group (6) until the handle is aligned with the padlock symbol placed on the group
itself. By pressing the buttons (1 and 4) at the same time (Pic. 2.2), the operation
will proceed automatically. When the rst cleaning operation is nished, empty
the drip tray, reinstall it and press the buttons (1 and 4) at the same time again.
Empty the drip tray also after this operation and reinstall it. Remove the
lterholder (G) from the group and rinse it with hot water from the brewing group
(Pic. 2.3). Take out the blind lter (C) from the lterholder (G) and insert the
2-doses lter (B) into the lterholder (G). Re-insert the lterholder (G) in the
group and press the buttons (1 and 4) at the same time (Pic. 2.2), the operation
will proceed automatically.
At the end of the operation, remove the lterholder (G) from the brewing group
and take out the 2-doses lter (B). Empty the drip tray (15) and rinse the
lterholder (G), the lters and the tray (15) with plenty of tap water. Possible
splashes of water during the backushing must be removed immediately from
the appliance body using a damp cloth, in order to avoid ruining the surface of
the coffee machine.