English
13
EN
11.2
To activate the xed wand (5) and dispense hot
water press the hot water button (4). Press the
button (4) again to stop the function (Pic. 11.2).
12. Reserve mode
12.1
The "Reserve mode" is activated when, during a
coffee extraction, the water in the water tank nishes
and allows to complete the extraction in progress.
The LCC display (13) shows the symbol of a water
tap with a water drop next to the extraction time
(Pic. 12.1). The machine continues the coffee
extraction up to a maximum of 60 seconds from
the appearance of the symbol. At the end of the
extraction, the LCC display (13) shows the "missing
water" symbol.
13. Standby mode
13.1 13.2 13.3
30
min
OFF
1
After 30 minutes of inactivity, the machine will go automatically in standby mode.
The LCC display (13) and the heating element are disabled and the coffee button
(1) ashes each 3 seconds (Pic. 13.1).
To Next Page
Loading...
