4
BLUES
STEREO input channel
10. PEAK
Luminous peak indicator: lights up when the signal is near (-6dB) distortion
point (CLIP).
11. SIGN
Luminous signal indicator: this green LED lights up with a -15dB input signal,
enabling the operator to monitor the presence of a signal on the input.
12. CHANNEL FADER
60mm. fader for controlling channel level: regulates the level of each channel
sent to the MIX L&R main outputs.
1. LEFT/RIGHT RCA pin
Two RCA pin connectors (-45dB /47kOhms): receive the stereo phono input
signal on the channel. Turntable with magnetic pick-up should be connected here.
2. LEFT/RIGHT JACK
Two balanced JACK connectors (0dB / 10kOhms): receive the line input signal
on the channel.
3. LINE / PHONO
Channel input selector: for enabling LINE or PHONO input.
4. STR / MNO
Selector for STEREO/MONO switching: when this button is pressed, the LEFT
& RIGHT signals are summed in a single mono signal and sent to the LEFT, RIGHT
and MONO outputs.
STEREO input channel
LEFT
RIGHT
RIGHT
LEFT
5/6
1
2
3
STR/MNO
LINE/PHONO
4
To Next Page
Loading...
