quiet sounds is increased, and the volume of loud sounds is reduced. This can be useful
if you are listening to music with a high dynamic range in a noisy environment (for
example, classical music while cooking).
To change the DRC of the MSY3, select M
enu > DRC, and then DRC high, DRC low or
DRC off.
Note: The MSY3’s DRC setting does have any effect if DRC data is not included in the
broadcast.
S
tation order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble
or Valid. Ensemble lists groups of stations that are broadcast together on the same
ensemble, for example BBC or South Wales local. Valid lists valid stations first,
alphanumerically, then off-air stations.
To change station order, select M
enu > Station order > then Alphanumeric, Ensemble
or Valid.
7
. FM radio mode
FM radio mode receives analogue radio from the FM band and displays RDS
(Radio Data System) information about the station and show (where broadcast).
To enter FM mode, either press m
ode to choose FM Radio or select Menu >Main
menu >FM.
7.1 Selecting stations
To find a station, press Select. The frequency display starts to run up as MSY3 scans
the FM band. Alternatively, you can scan up or down by pressing and holding the >> or
<<buttons or tune manually with quick presses, or by turning the Select control.
Presets to store an FM preset, press and hold button P
res set until the display
22
To Next Page
Loading...
Need help?
General
