EasyManua.ls Logo

LEMEGA MSY3 - Alarm and Sleep Timer Features; Configuring Alarms and Snooze

LEMEGA MSY3
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjust the volume level on your device. You should not have to pair your
iPhone/iPod/iPad again. The volume output level of music files varies.
If you prefer an even higher output level, check the settings in your iPhone/iPod
touch/iPad:
Set the EQ Off, the Sound Check Off, and the Volume limit Off. If you encounter a
problem Pairing, press the small arrow to the right of “LEMEGA MSY3” on your
iPhone/iPod touch/iPad display and select “Forget this Device”, then repeat the Pairing
proc
ess. Depending on your device.
You may need to make multiple attempts at Pairing and/or Connecting to the MSY3, but
please give your device adequate time to Pair or Connect before repeating the process.
1
0. Alarms and sleep
As well as a clock/calendar, there are two versatile wake-up alarms with snooze facility,
and a sleep function to turn the system off after a set period. Each alarm can be set to
start in a particular mode.
10.1 Alarms
To set or change an alarm, either press Alarm or select Menu > Main Menu > Alarms.
Select the alarm number (1 or 2) then configure the following parameters:
Enable: on/off,
Frequency: Daily, Once, Weekends or Weekdays,
Time:0-max
Mode: Buzzer, Internet radio, DAB, FM
Preset: Last listened or 1-20,
Volume: 0 - max.
To activate the new settings, scroll down and select Save.
The screen shows active alarms with an icon at the bottom left.
25

Related product manuals