LEMKEN Heliodor 8 - Maintenance Intervals; After Commissioning (Within 2 Hours); Daily Check; Weekly Check

Maintenance and repairs
89
15.3 Maintenance intervals
15.3.1 After commissioning (within 2 hours)
Check What to do?
Screw connections
 Retighten all bolts and nuts on the device to the ap-
propriate torque. See section entitled “Tightening tor-
ques”.
15.3.2 Daily check
Check What to do?
Hydraulic hoses
 Check hydraulic hoses for damage and leaks.
 Replace damaged or defective hydraulic hoses im-
mediately.
The hydraulic hoses must be replaced 6 years after the
date of manufacture at the latest. Only used hydraulic
hoses approved by Lemken.
Safety equipment
 Check that all safety equipment is functioning
properly. See "Safety equipment" section.
Soil processing tools
 Check all soil processing tools for damage and wear.
 Replace damaged or worn components.
15.3.3 Weekly check
Check What to do?
Screw connections

Tighten all screws and nuts on the implement to
the appropriate tightening torque.
 If necessary, secure the screw connections with
screw locking devices.
See section entitled “Tightening torques”.