16
Before operation:
1. Plug the external antenna or the connecting line of CATV to the TV signal jack on the
left panel of the player and put the player in TV mode. (make sure the AV-switch is
set to “OUT”)
2. Press the SETUP button on the remote control or the menu button on the panel to
display the setup menu. Press the or button to shift to TV SETUP menu below.
Press the CH/ button on the remote control to highlight the item you want to
setup. Press the SETUP button again to exit.
TV SETUP
1. SYSTEM
Press the or button to select, the available items include:PAL B/G, SECAM
L’/L, PAL D/K or PAL I.
2. CHANNEL
Press the or button to select channels.
3. FINE Tuning
When the picture quality and the accompanied sound are not optimal, you can set up
the fine tuning to improve this.
Press the or button to fine tune downward or upward. When the picture and
the accompanied sound reach the best performance, stop fine tuning and the
program will be saved automatically.
TV Operations
TV SETUP
SYSTEM
CHANNEL
FINE
SKIP
AUTO
PAL B/G
0
44.00VL
ON
To Next Page
Loading...
