LENCO SCD-6000 User Manual

POWER SUPPLY
USING HOUSE CURRENT
Before use, check that the rated voltage of your unit matches
your local voltage.
Note: The plug is used to disconnect the device. The
disconnected device shall remain readily operable.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
Insert 6 UM-2
( size C ) batteries.
battery door
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
To AC socket
To AC outlet
TURNING ON / OFF THE UNIT
GB 2
Connect the device , Set the POWER switch to the ON position,
LENCO SCD-6000 will be displayed for a few seconds. Please wait.
Then the clock and date will be shown.
Press the STANDBY button unit it will then enter STANDBY mode,
display will show the Time / Date.The rst time you listen to DAB radio,
the time and date of your device will synchronise automatically.
ADJUSTING THE SOUND
TO ADJUST THE VOLUME
FOR PRIVATE LISTENING
Plug in headphones (ø3.5 mm stereo mini-plug) to the
HEADPHONE jack.
When headphones are plugged in, the speakers are
automatically disconnected.
MAX.
MIN.
VOLUME
When the unit is on, Press the MODE button to select desired mode:
INTERNET RADIO, PODCASTS, DAB, FM , CD, BT, AUX ,.
To turn o󰀨 the unit by sliding the POWER switch to OFF position.
SCD-6000

LENCO SCD-6000 Specifications

General

Brand	LENCO
Model	SCD-6000
Category	Portable Stereo System
Language	English