LENCO SCD-6000 - Listening to Fm Radio; Preset Stations; Repeat Playback

LISTENING TO FM RADIO
Press the MODE button,
turn the TUNING button backward or forward to select FM radio mode.
Note: For a better reception, extend the telescopic antenna.
This unit can store 10 FM and 10 DAB/DAB+ stations.
1.Press MODE button,turn the TUNING button backward or forward to select FM or DAB/DAB+ band.
2.Turn the TUNING button backward or forward to select adjust the radio frequency.
3. Long press the PRESET 1 button to conrm the radio station is stored.
4. Turn the TUNING button backward or forward to select adjust another radio frequency.
5. Long press the PRESET 2 button to conrm the radio station is stored.
6. Turn the TUNING button backward or forward to select adjust another radio frequency.
7. Long press the PRESET 3 button to conrm the radio station is stored.
8. Turn the TUNING button backward or forward to select adjust another radio frequency.
9. Long press the PRESET 4 button to conrm the radio station is stored.
10. Turn the TUNING button backward or forward to select adjust another radio frequency.
11. Long press the PRESET 5 button to conrm the radio station is stored.
Listening to preset stations by short pressing the PRESET 1-5 button.
Or press the PRESET button to enter the PRESET RECALL state.
In order to save presets 6-10 press and hold the PRESET button, then scroll to the preferred number.
Press select to conrm.
Turn the TUNING button forward and backward to recall a preset radio station.
Note: If you choose a station that hasn’t been allocated, “Empty” will be displayed. If the station has been
allocated before, the FM frequency or DAB station name will be showed.
PRESET STATIONS
GB 5
LISTENING TO CD
1. Press the MODE button , Turn the TUNING button backward or forward to select CD mode.
2. Open the CD door by gently pulling up the CD door. Insert a disc with the label side
facing up. Close the CD door.
3. Short press the PLAY/PAUSE button to play the CD , press the PLAY/PAUSE
button again to resume playback .
4. Then turn the TUNING button backward or forward to select desired track.
Then normal CD playback will resume from this track.
5. Short press the STOP button to stop CD playing.
REPEAT PLAYBACK
This function allows a single track or all tracks on a disc to be played repeatedly.
1. Press the REPEAT button once during playback to repeat the same track. The display show
2. Press the REPEAT button twice to repeat the whole disc.The display show
3. Press the REPEAT button again to turn on random play.
The display show
4. Press the REPEAT button again to cancel repeat and random play.
1