LENCO SCD-6000 User Manual

CONNECTION TO A NETWORK
1. Long press the MENU/INFO button at power on mode,
Turn the TUNING button backward or forward to select " System settings". Press the SELECT button to conrm it.
2. Turn the TUNING button backward or forward to select " Network" and enter to Network Setting mode.
There are several di󰀨erent settings can be selected by Turning the TUNING button backward or forward
such as :
- Network wizard
- PBC Wlan setup
- View settings
- Manual Settings
- Netremote PIN Setup
- Network prole
- Clear network settings
- Keep network connected
LANGUAGE
1. Select a language for the internet radio menu, Long press the MENU/INFO button at power on mode,
Turn the TUNING button backward or forward to select " System settings". Press the SELECT button to conrm it.
2. Turn the TUNING button backward or forward to select " Language".Press the SELECT button to conrm it.
There are several languages can be selected 'by Turning the TUNING button backward or forward such as :
English, Dansk, Nederlands, Suomi, Francais, Deutsch, Italiano, Norsk, Polski, Portugues, Espanol,Svenska,
Turkce.
EQUALIZER
1. Long press the MENU/INFO button at power on mode,
Turn the TUNING button backward or forward to select " System settings". Press the SELECT button to conrm it.
2. Turn the TUNING button backward or forward to select " Equalizer".
Default equalizer is Normal, you may change to Flat, Jazz, Rock, Movie, Classic, Pop, News , My EQ and
My EQ prole setup: Bass/ Treble/ Loudess.
LISTENING TO DAB/DAB+ RADIO
1. Press the MODE button, turn the TUNING button backward or forward toto select DAB mode.
The radio will start automatic scan for DAB stations if it’s the rst time to use the unit.
The display will change to “Scanning…”. A progress bar will show the progress of
the scan and the number of stations found during the scan will also be displayed.
2. When the scan is complete, the radio will select the rst available station and begin
to broadcast. Stations are listed in numerical and then alphabetical order by default.
Note: When the DAB/DAB+ radio station list is stored, it will not search automatically again. Press and hold
SCAN button to search and list station.
3. Press the SELECT button to select the stations in the list.
4. When the desired station is displayed, press the SELECT button to conrm. There will be a short delay while
your radio tunes to your selected station.
Note:
- If no broadcasts are found by DAB/DAB+ scan, “No stations found” appears in the display.
- For a better reception, extend the telescopic antenna or do the full scan again in another place.
- During the search operation, the sound level is automatically muted.
GB 4

LENCO SCD-6000 Specifications

General

Brand	LENCO
Model	SCD-6000
Category	Portable Stereo System
Language	English