LENCO SCD-6000 User Manual

SETTING THE TIME AND DATE
1. Long press the MENU/INFO button at power on mode,
Turn the TUNING button backward or forward to select " System settings". Press the SELECT button to conrm it.
2. Turn the TUNING button backward or forward to select " Time/Date".
Press the SELECT button to conrm it.
3. Turn the TUNING button backward or forward to select " Set Time/Date".
Press the SELECT button to conrm it.
4.The date digit ash on the display.Turn the TUNING button backward or
forward to adjust date digit. Press the SELECT button to conrm it.
5. The month digit ash on the display. Turn the TUNING button backward or
forward to adjust month digit. Press the SELECT button to conrm it.
6. The year digit ash on the display. Turn the TUNING button backward or
forward to adjust year digit. Press the SELECT button to conrm it.
7. The hour digit ash on the display. Turn the TUNING button backward or backward or forward to adjust hour digit.
Press the SELECT button to conrm it .
8.The minute digit ash on the display. Turn the TUNING button backward or backward or forward to adjust minute
digit.Press the SELECT button to conrm it ,
9. Press the STANDBY button to show the correct time and date on the display.
- Note: When do the setting in the menu, press the MENU button to return back to previous step.
GB 3
SETTING THE ALARM / THE ALARM MODE AND SNOOZE
1. Press the STANDY button and then long press the MENU/INFO button.
2. Turn the TUNING button backward or forward to select "Main menu ". Press the SELECT button to conrm it.
3. Turn the TUNING button backward or forward to select "Alarms". Press the SELECT button to conrm it.
4. Turn the TUNING button backward or forward to select "Alarm 1". Press the SELECT button to conrm it.
5. Turn the TUNING button backward or forward to select " Enable". Press the SELECT button to conrm it.
6. Turn the TUNING button backward or forward to select " Daily". Press the SELECT button to conrm it.
7. Turn the TUNING button backward or forward to select " Time".Press the SELECT button to conrm it.
8. The hour digit ash on the display.Turn the TUNING button backward or forward to adjust hour digit.
Press the SELECT button to conrm it
9. The minute digit ash on the display.Turn the TUNING button backward or forward to adjust minute digit.
Press the SELECT button to conrm it.
10.Turn the TUNING button backward or forward to " Save". Press the SELECT button to conrm it.
The " Alarm Saved " is shown on the display.
12. Same procedure applies for Alarm 2 .
13. Press STANDBY button, 2 ALARM CLOCK indicators
are shown on the display.
SNOOZE ( REPEAT ALARM )
When the alarm sounds at the preset time, you can turn o󰀨 the sounds temporarily by pressing the STANDBY button.
Turn the VOLUME button backward or forward to select the snooze time 5,10,15,30 minutes.
The ALARM CLOCK indicators are blinking on the display and count the time backwards.
TO STOP ALARM
1. Press the STANDY button and then long press the MENU/INFO button.
2. Turn the TUNING button backward or forward to select "Main menu". Press the SELECT button to conrm it.
3. Turn the TUNING button backward or forward to select "Alarms ". Press the SELECT button to conrm it.
4. Turn the TUNING button backward or forward to select "Alarm 1". Press the SELECT button to conrm it.
5. Turn the TUNING button backward or forward to select " Enable". Press the SELECT button to conrm it.
6. Turn the TUNING button backward or forward to select " O󰀨" Press the SELECT button to conrm it.
7. Turn the TUNING button backward or forward to select " Save" Press the SELECT button to conrm it.
The " Alarm Saved " is shown on the display.
8. Same procedure applies for Alarm 2 .
9. Press STANDBY button, 2 ALARM CLOCK indicators are disappered on the display.

LENCO SCD-6000 Specifications

General

Brand	LENCO
Model	SCD-6000
Category	Portable Stereo System
Language	English