Why is my LENCO LCD TV remote control not working?
Your LENCO LCD TV remote might not be working because the battery is exhausted. Try changing the battery. Also, make sure you are aiming the remote control directly at the box and that nothing is blocking the front panel.
What to do if my LENCO LCD TV says 'No signal' when searching for channels?
If your LENCO LCD TV displays a 'No signal' message during channel searching, it could be due to several reasons: * The aerial might not be properly connected. Check the aerial installation and its connections. * The aerial might not be correctly directed towards the transmitter. Ensure the aerial is pointing towards the transmitters. * The aerial may not be suitable for digital channels. If issues persist, consult your local TV dealer to verify if the aerial is designed for receiving digital transmissions. * The signal might be too weak for the connected aerial. Confirm that digital transmissions are available in your area. * There might be no terrestrial digital transmissions available in your area, in which case you may need to exchange the aerial.
How to fix LENCO LCD TV when the LED does not light up?
If the LED on your LENCO LCD TV doesn't light up, there are a few potential causes. First, check that the mains cable is properly plugged into the power socket. If it uses a battery, make sure the battery is installed correctly and charged. Finally, if there's condensed fluid in the machine, do not use it for at least one hour.
What to do if my LENCO LCD TV screen is closed but the power LED is on?
If your LENCO LCD TV screen is closed but the power LED is on, the battery may be exhausted. Try changing the battery.
What to do if my LENCO LCD TV doesn’t display the subtitle?
If your LENCO LCD TV isn’t displaying subtitles, it may be due to the program signal lacking subtitle data. Try pressing the S.TIT button to enable subtitles. Alternatively, the subtitle function may not be enabled, or the signal might be too weak. Ensure you have a good signal.
Why are the buttons insensitive during channel searching on my LENCO LCD TV?
During the channel searching process on your LENCO LCD TV, the buttons or remote controller’s keys may become insensitive because the system uses a lot of resources. Try pressing the buttons or remote controller’s keys several times.
Why can't my LENCO LCD TV play music or video files correctly?
Your LENCO LCD TV might not be playing music or video files correctly if the file is damaged or the code is incorrect. Try changing to the correct files. If it is a video, the format might be incompatible or the file is damaged. Note that the maximum bit-rate of the video should be 8Mbps.
Why is the picture or video not full screen on my LENCO LCD TV?
The picture or video on your LENCO LCD TV might not be full screen if the resolution of the files is not suitable. Try changing the files.
General| Aspect Ratio | 16:9 |
|---|---|
| Built-in Speakers | Yes |
| Response Time | 8 ms |
| Screen Size | 10 inches |
| Power Source | AC 100-240V, 50/60Hz |
| Connectors | HDMI, USB, VGA, AV in |
| Input Voltage | DC 12V |
To Next Page
