2
Table of Contents
Shipping and Packing List 2...............
Description 2...........................
Installation 3............................
Menu 8................................
Installer Settings 9.......................
Dehumidify Mode 24......................
Economizer 26...........................
Unit Part (Catalog) & Serial Numbers 27......
Memory Protection 27.....................
Start-Up Sequence of Operations 28.........
Diagnostic Information 29..................
Reminder Information 32...................
Supported Configurations 33...............
Installation Checklist 34....................
Shipping and Packing List
1 - ComfortSense
®
7500 touchscreen, 7-day
programmable thermostat with back plate
1 - Wall plate
2 - Mounting screws (M3.5x25mm self-tapping
screws)
2 - Wall anchors
1 - Warranty sheet
1 each - User and Installer Guides
Description
The ComfortSense
®
7500 commercial thermostat is
an electronic 7-day universal multi‐stage
programmable touch screen thermostat. It also
offers enhanced capabilities which include:
S dehumidification measurement and control,
S equipment maintenance reminders,
S worry-free memory storage feature,
S menu-driven touch-screen display.
This thermostat supports heat pumps (single or two
stage) or non-heat pump units, with up to:
S two auxiliary stages
S two stages of heating and two stages of
cooling.
S Economizer support
Unit Dimensions (H x W x D)
Case dimensions: 3-5/16 x 4-5/16 x 7/8 in. (84 x 110
x 22mm)
Wall Plate Dimensions (H x W)
Plate dimensions: 4-1/2” x 5-3/4” (114 x 146mm)
Compressor Short Cycle Protection
This thermostat is equipped with automatic
compressor protection to prevent potential damage
due to short cycling or extended power outages.
The short-cycle protection provides a 5-minute
delay between heating or cooling cycles to prevent
the compressor from being damaged.
A 5-minute compressor short cycle protection timer
begins when a compressor output is de-energized.
To Next Page
Loading...
