12
Table 3. User Settings (General)
Setting Selection Function Description
general - provides
information about the
thermostat and settings for
screen lock, date & time
and language.
occupancy
Pre-Occupancy: Options are 0 through 3 hours with a default of 0 hour.
This selection opens the dampers early, either 1, 2 or 3 hours.
Post-Occupancy: Options are 0 through 3 hours with a default of 0
your. This selection keeps the dampers open, either 1, 2 or 3 hours.
display - Allows the user
to control some information
that is displayed on the
home screen.
Outdoor
temperature
display or
discharged
air display
(what is
displayed
here
depends
on sensor
used and
congured
by installer.
Options are off or sensor.
screen saver
Options are enable and disable. Default is enabled. When enabled
only the time and inside temperature is displayed on the screen.
Touching the screen will restore all other details.
The back light setting is also on the same screen. Options are
continuous on or energy save. Default is continuous on.
screen
brightness
A horizontal adjustment bar is provided to move from minimum to
maximum brightness.
temperature
scale
°F for Fahrenheit or C° for Celsius.
clean screen This will disable the touchscreen for 30 seconds.
To Previous Page
Loading...
Need help?
General
