• 23 •
DS
OS
AS
RS
RS HR/T
CO2
DPT
OS HR/T
AS HRT
LDRP
7 x 1,5 mm²
DADS
5 x 1,5 mm²
BAC
4 x 1,5 mm²
Installation, Operation and Maintenance manual • CSC/CSH-MIL153E-1217-05/2018
2.- INSTALLATION
2.8.- ELECTRICAL CONNECTIONS
VOLTAGE OPERATING LIMITS: 342-462V
COMFORT AND SERVICE TERMINAL CONNECTION
CONNECTION OF CONTROL ELEMENTS:
COMPONENT
Discharge sensor STANDARD 2 x 1 mm² (shielded)
Outdoor sensor STANDARD 2 x 1 mm² (shielded)
Remote ambient sensor STANDARD 2 x 1 mm² (shielded)
Remote duct sensor OPTION 2 x 1 mm² (shielded)
Duct remote sensor for enthalpic free-cooling OPTION 6 x 1 mm² (shielded)
CO2 Air quality probe. (Available only with enthalpic free-cooling) OPTION 4 x 1 mm² (shielded)
Air differential pressure transducer OPTION 3x 1 mm² (shielded)
Outdoor sensor for enthalpic free-cooling OPTION 5 x 1 mm² (shielded)
Remote ambient sensor for enthalpic free-cooling OPTION 6 x 1 mm² (shielded)
Long distance connection OPTION
Smoke detector OPTION
Hot water coil OPTION
Air treatment unit. Example
To Next Page
Loading...
