507341-01
2
TABLE OF CONTENTS
iComfort Wi-FI
®
Thermostat - Technical Description and Features 2...
Installation and Setup 3........................................
Adjusting System Settings 4....................................
Connecting to Home Wi-Fi Router 5..............................
Troubleshooting Wi-Fi Connection 8..............................
Account Registration 12.........................................
Firmware Update 12............................................
Adding Non-Communicating Outdoor Unit and Accessories 12.........
Outdoor Unit (Air Conditioner or Heat Pump) 12...................
Bypass (24VAC) Humidifier 13..................................
Humiditrol
®
or Auxiliary Dehumidifier 13..........................
Adjusting Humidification and Dehumidification Settings with
Communicating Outdoor Units 14.................................
Adjusting Humidification and Dehumidification Settings with
Non-Communicating Outdoor Units 15.............................
Adjusting Zoning Control Settings 17..............................
Using the Tests / Diagnostics Features 18..........................
Wiring Diagrams 37.............................................
Configuring Air Handler Electric Heat 46...........................
Using the Secure Web Portal 47..................................
Screen-Saver 47...............................................
Accessing Installer Screens and Changing
Equipment Parameters 47.......................................
WARNING
Improper installation, adjustment, alteration, service or maintenance
can cause property damage, personal injury or loss of life.
Installation and service must be performed by a licensed professional
HVAC installer (or equivalent) or service agency.
WARNING
This is a 24VAC Class 2 thermostat. Do not install on voltages higher
than 30VAC.
Do not switch system to cool if the outdoor temperature is below 45°F
(7°C). This can damage the cooling system.
iComfort Wi‐Fi
®
Thermostat - Technical Description and
Features
The 24VAC iComfort Wi‐Fi
®
thermostat is an electronic communicating,
color display touchscreen and 7-day programmable thermostat. It stores
system parameters and settings in non-volatile memory (i.e., it retains data
when electrical power fails or is turned off).
The iComfort Wi‐Fi
®
thermostat can connect to online services via the
Internet through the homeowner's Wi-Fi access point. After online
registration is completed, the system may then be accessed by the
homeowner from anywhere using a remote Internet connection via computer
or personal communicating device.
Refer to page 37 for information on making connections to the thermostat.