Lennox icomfort Wi-Fi - Page 43

iComfort Wi‐Fi
®
7-Day Programmable Communicating Thermostat
43
Optional Accessories Wiring
FOR USE WITH ANY ICOMFORT BY LENNOX SYSTEM
iComfort Wi‐Fi
®
Thermostat
RSBus
LVCS Ventilation Control System
iComfort by Lennox
Furnace or Air Handler
HEPA Bypass Filter X2680 HEPA Interlock Kit
Pass indoor blower
motor common wire
through current loop.
See HEPA Interlock Kit
for installation details
iComfort by
Lennox
Outdoor Air
Conditioning
or Heat Pump
Standard 1 or 2 stage AC
or HP unit
iComfort by
Lennox
Furnace or
Air Handler
iComfort by Lennox
Furnace or Air Handler
(POWER COMPANY INTERRUPTION
SYSTEMS ARE WIRED SAME AS
OVERFLOW SWITCH)
iComfort by Lennox
2-STAGE FURNACE
CUT
R-DS
W914
DS
R
26L56 Current sensing
relay kit.
NOTE: Pass the blower motor L1 wire through the current loop on the current sensing
relay as shown.
LVCS. Set cycle time to 1 hour; set ventilation time to 60 minutes.
NOTE: Use the iComfort
®
circulate fan percentage of ON* TIME to control ventilation
time.
iComfort by Lennox
SLP98 & G71MPP FURNACE
(IFC) OR AIR HANDLER (AHC)
HVAC Heat or Cool
call, or the fan is in
continuous operation,
the ventilation control
ler will open OA
damper to ventilate if
the outdoor temperat
ure and indoor humid
ity are within the limits
of the ventilation con
troller.
f
Vent
ODT