Page 86 - IOM / Rooftop Smart and Linéa™ Range
CLIMACLIMA
CLIMACLIMA
CLIMA
TIC™ PTIC™ P
TIC™ PTIC™ P
TIC™ P
ARAR
ARAR
AR
AMETERSAMETERS
AMETERSAMETERS
AMETERS
ON - OFF
The unit is declared On if setpoint 6 (C06) is ON.
The unit can be stopped by a remote control command by
volt free contact.
On KP12 extension card - see chapter on BMS contact kit.
For certain configurations a CLIMATIC™ system actuator
can be used to control an external function (option : Client).
The Client option is declared On if setpoint 7 (C07) is ON.
DEFINITION OF TIME SLOT PARAMETERS
The CLIMATIC™ allows you to programme 5 operating
zones per day, in addition to an idle zone for the weekend.
Slot activation is :
- automatically controlled by the CLIMATIC™, if you have
defined these time parameters for each slot
- forced manually by action on the controller (instructions
02/03 and 04 for KP02).
- forced by the BMS contacts kit (see this chapter).
- forced by the computer connection.
The five available time slots are :
WEEK-END
NIGHT
MORNING
NOON
EVENING
If none of the time slots listed above is active, the active slot
is :
DAY
A particular time slot :
BMS is activated if the unit is connected to a
computer network.
With the KP07 :
- Go directly to the screen concerning the time slot to be
modified, enter the parameters described below on the
screen (see organisation of screens in KP07chapter).
With the KP02 :
- The slot to be set up must first be defined by the 08 ins-
truction. Enter the information below then return to the
08 instruction to go to the next slot.
0123
Friday 22h. Monday 8h.
456789101112131415161718192021222324
Figure 78
To Next Page
Loading...
