Lenovo Flex System Fabric CN4093 Installation Guide

© Copyright Lenovo 2017 Chapter 3: Configuring the CN4093 43
Accessing the Switch Through the Browser-Based Interface
Beforeyoucanaccessandstartthebrowser‐basedinterface,makesurethatyou
havecompletedthefollowingprocedures:
 ConfigureatleastoneIPinterfaceontheswitch.Referto“Establishingan
InterfaceThroughtheCMM”onpage 39formoreinformation.
 EnableframesandtheJavaScriptprograminyourWebbrowser.
ThefollowinghardwareandsoftwarearerequiredfortheWebinterface:
 Aframe‐capableWeb‐browserprogram,suchasInternetExplorer(version7.0
orlater),MozillaFirefox(version8.0orlater),orGoogleChrome(version16.0or
later)
 Acomputerorworkstationwithnetworkaccesstotheswitch
Tostartthebrowser‐basedinterface,completethefollowingsteps:
1. StartaWebbrowser.TheWeb‐browserwindowopens.
2. IntheURLfield,entertheIPaddressoftheswitch,inthefollowingformat:
https://xxx.xxx.xxx.xxx.
Theloginwindowopens.
3. Whenprompted,
enteryourusernameandpasswordandclickOK.
 Whenloggingintoaswitchforthefirsttime,thedefaultswitchadministrator
usernameisUSERID,andthedefaultpasswordisPASSW0RD
(wherethesixth
characteristhenumberzero,nottheletterO).TheUserIDandpasswordfields
arecase‐sensitive.
Forsecuritypurposes,youwillbepromptedtochangethe
administratorpasswordafterthefirstsuccessfullogin.
 Otherwise,ifyouhaveanassigneduseraccount,useyourassigneduser
nameandpassword.

Lenovo Flex System Fabric CN4093 Specifications

General

Brand	Lenovo
Model	Flex System Fabric CN4093
Category	Switch
Language	English