Table 1. Server specifications (continued)
Specification
Description
Input/Output (I/O) features
• Front:
– One VGA connector
– One USB 2.0 connector
– One USB 3.0 connector
• Rear:
– Three USB 3.0 connectors
– One VGA connector
– One COM connector (optional)
– One RJ45 connector
– One OCP 3.0 SFF (Optional)
For detailed information about each component, see “Front view” on page 5 and
“Rear view” on page 12.
System fans
Up to eight dual-rotor hot-swap fans (including two redundant fans)
• Standard fan 4056 (21000 RPM)
• Performance fan 4056 (24000 RPM)
Electrical input
AC input:
• Platinum: 100 - 240 VDC (500 W/750 W/1100 W)
• Titanium: 200 - 240 VDC (750 W)
DC input:
• 240 HVDC (500 W/750 W/1100 W), Chinese Mainland ONLY
CAUTION:
• Use Lenovo Capacity Planner to calculate the required power capacity for
what is configured for your server. More information about Lenovo Capacity
Planner is available at:
Lenovo Capacity Planner website
• Ensure that the power supply units that you are installing are supported.
• 240 HVDC input is supported in Chinese Mainland ONLY.
• The server can be configured with one or two power supply units.
Redundancy mode and hot-swap functions are supported only when two
power supply units are installed.
Chapter 1. Introduction 3
To Next Page
Loading...
