Figure 78. Fan board installation
Step 1. Gently hold and lower the fan board into the fan board tray.
Step 2. Hold the lift handle and slide the fan board toward the left side of the server at the same time.
Step 3. Install the three screws to secure the fan board.
After installing the fan board:
1. Install the system fans. See “Install a system fan” on page 98.
2. Connect the fan board power cable, and other cables you disconnected before.
3. Complete the parts replacement. See “Complete the parts replacement” on page 110.
System board replacement
Use this information to remove and install the system board.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
S012
102 HR630X V2 User Guide
To Next Page
Loading...
