CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read “Installation Guidelines” on page 27 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
Procedure
Step 1. Align the direction of the air baffle according to indications on it.
Figure 6. Air baffle installation
Step 2. Lower the air baffle into the chassis and press the air baffle down until it is securely seated.
After you finish
1. Complete the parts replacement. See “Complete the parts replacement” on page 110.
CMOS battery replacement
Use this information to remove and install the CMOS battery.
Remove the CMOS battery
Use this information to remove the CMOS battery.
About this task
Chapter 4. Hardware replacement procedures 31
To Next Page
Loading...
