Lenovo Q24i-10 User Manual (English)

Questions and Answers:

M
morrisangelaJul 27, 2025
How to fix blurry image on Lenovo Q24i-10 Monitor?
- S
  Samantha GrahamJul 27, 2025
  To fix a blurry image on your Lenovo Monitor, adjust the resolution settings on your system to match the native resolution for this monitor: 1920 x 1080 at 60 Hz. Perform automatic image setup, and if that doesn't help, perform manual image setup. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system. The issue may be because image setup has not been optimized or your system Display Properties setting have not been optimized.
B
Brittany YoungJul 31, 2025
How to improve the image quality on my Lenovo Monitor?
- H
  hwrightJul 31, 2025
  To improve the image quality on your Lenovo Monitor, ensure the video signal cable is firmly plugged into both the system and the monitor. Select another color setting from the OSD menu. Perform automatic image setup. The unacceptable image quality may be caused by the video signal cable not being completely connected, incorrect color settings, or the automatic image setup function not being performed.
D
Destiny HoffmanAug 5, 2025
What to do if Lenovo Q24i-10 power indicator is not lit?
- L
  lewisjonathanAug 5, 2025
  If the Lenovo Monitor's power indicator isn't lit and there's no image, ensure the power cord is properly connected and the outlet has power. Power on the monitor. Try another power cord or electrical outlet. It might be that the monitor’s power switch is not switched on, the power cord is loose or disconnected, or there is no power at the outlet.
N
Nathan MooreAug 9, 2025
Why is my Lenovo Q24i-10 Monitor screen blank but the power indicator is amber?
- D
  destinyrogersAug 10, 2025
  If your Lenovo Monitor screen is blank but the power indicator is amber, the monitor is likely in Standby/Suspend mode. Press any key on the keyboard or move the mouse to restore operation. Also, check the Power Options settings on your computer, as the cause may be that the monitor is in Standby/Suspend mode.
E
Emily ThomasAug 13, 2025
What to do if Lenovo Q24i-10 Monitor power indicator is amber but no image?
- R
  Rebecca HessAug 13, 2025
  If your Lenovo Monitor's power indicator is amber but there is no image, ensure the video cable is properly connected to the system. Adjust the brightness and contrast settings in the OSD menu. The issue might be due to a loose video signal cable or the brightness and contrast being at their lowest settings.
S
Shirley DominguezAug 18, 2025
How to fix Lenovo Monitor showing 'Out of Range' error?
- B
  Brenda WyattAug 18, 2025
  If your Lenovo Monitor displays 'Out of Range' and the power indicator is flashing white, and if you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. The system is set to a display mode which is not supported by the monitor.
K
Kayla BrownAug 22, 2025
Why are there discolored pixels on my Lenovo Q24i-10 Monitor?
- Y
  Yesenia BowmanAug 22, 2025
  The appearance of one or more discolored pixels is a characteristic of LCD technology and not necessarily a defect. If there are more than five pixels missing, contact the Support Center.

Lenovo Q24i-10 Specifications

General

3D	No
Pixel pitch	0.2745 x 0.2745 mm
Screen shape	Flat
Backlight type	W-LED
Display diagonal	23.8 \
Display technology	LCD
Native aspect ratio	16:9
Maximum refresh rate	75 Hz
Response time (fast)	6 ms
NTSC coverage (typical)	72 %
Contrast ratio (dynamic)	3000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
Cable lock slot	-
Tilt angle range	-5 - 22 °
Panel mounting interface	100 x 100 mm
Power consumption (standby)	- W
RMS rated power	6 W
Number of speakers	2
Product color	Grey, Silver
Market positioning	Home
Package depth	645 mm
Package width	160 mm
Package height	407 mm
Package weight	6500 g
Cables included	AC, HDMI
HDMI version	1.4
DisplayPorts quantity	0

Weight and Dimensions

Depth (with stand)	179.5 mm
Height (with stand)	434.7 mm
Weight (with stand)	4500 g
Depth (without stand)	36.9 mm
Width (without stand)	540.5 mm
Height (without stand)	324.7 mm
Weight (without stand)	2770 g