Chapter 3. Reference information
This section contains monitor specifications, instructions to manually install the monitor
driver, troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model 60C8-MAR1-WW
Dimensions Depth 264.1 mm (10.39 in.)
Height 372.5 mm (14.67 in.)
Width 563.6 mm (20.19 in.)
Stand Tilt Range: -5° ~ 30°
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size
604.70 mm (23.8 in.)
Maximum height
296.46 mm (11.79 in.)
Maximum width
527.04 mm (20.87 in.)
Pixel pitch
0.27 mm (0.01 in.)
Power input Supply voltage
90-264 V AC (100-240 V AC +/-10%)
Max supply current 1.5 A
-
Power consumption
Note: Power consumption
figures are for the monitor and
the power supply combined
Normal operation
22W
Standby/Suspend
<0.5 W (Analog), <0.5W (Digital)
Off
<0.3W at 100VAC and 240VAC
Note: without USB/
Webcam/external
speaker
Video input (Analog) Interface
VGA
Input signal
Analog Direct Drive, 75 ohm 0.7V
Horizontal
1920 pixels (max)
addressability
--
Vertical addressability
1080 lines (max)
Clock frequency
205 MHz
Chapter 3. 3-1
To Next Page
Loading...
Need help?
General