3.Pullthehandleandcarefullyslidethebracketwiththesolid-statedriveoutofthefrontofthechassis.
Figure91.Removingthebracketwiththesolid-statedrive
4.Removethefivescrewsthatsecurethesolid-statedriveandthe3.5-inchto2.5-inchdriveadapter.
Then,removethedriveadapterwiththesolid-statedrivefromthebracket.
Figure92.Removingthescrewsthatsecurethesolid-statedriveandthedriveadapter
Chapter6.Installing,removing,orreplacinghardware137
To Next Page
Loading...
