3. In the Select Keymap window, select a keyboard layout and press Enter.
4. In the Welcome to XenServer Setup window, select OK and press Enter.
5. In the End User License Agreement window, select Accept EULA and press Enter.
6. Select the hard disk drive that you want to use for virtual machine storage, select OK, and press Enter.
7. In the Select Installation Source window, specify the installation source, select OK, and press Enter.
8. In the Supplemental Packs window, select an option as you need and press Enter.
9. In the Verify Installation Source window, select an option as you need or select Skip verification to skip
the check. Then select OK and press Enter.
10. In the Set Password window, set your password, select OK, and press Enter.
11. In the Networking window, select an Ethernet adapter, select OK, and press Enter.
12. Configure the IP address, select OK, and press Enter.
13. In the Hostname and DNS Configuration window, configure the settings, select OK, and press Enter.
14. In the Select Time Zone window, select your time zone, select OK, and press Enter.
15. In the System Time window, select as you need or select Manual time entry to type the time information
at the end of the installation. Then select OK and press Enter.
16. In the Confirm Installation window, select Install XenServer and press Enter to start the installation.
17. In the New Media window, select Skip and press Enter.
18. In the Set Local Time window, set the local time, select OK, and press Enter.
19. When the installation completes, a notification window is displayed. Select OK and press Enter to restart
your server.
To upgrade the Citrix Xen Server 6.5.0 to Citrix Xen Server 6.5.1, do the following:
1. Start the Citrix Xencenter.
2. Choose Install Update from Tools.
3. In the Before You Start window, click Next.
4. In the Select Update window, click Add.
5. In the Choose Update File window, select the upgrade package you have downloaded and click Open.
6. In the Select Update window, click Next.
7. In the Select Servers window, select the required server and click Next.
8. In the Prechecks window, check the failed items and resolve problems as prompted. If needed, click
Resolve All to enable the Xencenter to automatically resolve problems for all items. Then click Next.
9. In the Update Mode, select an update mode and click Install Update to start the upgrade.
Note: If you click Cancel in this step, all updates and the upgrade file on the server will be deleted.
10. Click Finish to complete the upgrade.
98
ThinkServer RD650 and RD550 Operating System Installation Guide
To Next Page
Loading...
