29
Installing the Broadcom 9540-8i RAID Adapter
To install the Broadcom Adapter in the P5 follow these steps:
1. Remove the side cover from the system.
2. Install SATA HDDs in the internal storage bays and optional 3
rd
HDD bay if
needed.
Note: For instructions on how to install the SATA HDDs and optional 3
rd
HDD bay
please refer to the P5 Storage Whitepaper.
3. Connect the HDD Power connector of the SlimSAS to 3-drop SATA cable to the
motherboard port “MISC_PWR1”
To Next Page
Loading...
