(1) Host interface card (HIC)
(2) Thumbscrews
7.
Place the HIC on a static-free surface.
6.3.4. Step 4: Install the new HIC
Install the new host HIC.
Possible loss of data access — Never install a HIC in a DE6000H controller
canister if that HIC was designed for another DE Series controller. In addition, if
you have a duplex configuration, both controllers and both HICs must be
identical. The presence of incompatible or mismatched HICs will cause the
controllers to lock down when you apply power.
Steps
1.
Unpack the new HIC and the new HIC faceplate.
2.
Using a #1 Phillips screwdriver, remove the four screws that attach the HIC faceplate to the
controller canister, and remove the faceplate.
110
To Next Page
Loading...
